OPERATING DATA |
Digital inputs |
8 inputs to detect a volt free dry contact |
Digital outputs |
4 galvanically isolated relays with normally open, normally closed and common contacts. Each relay can be remotely triggered via the network or triggered by an input channel or combination of input channels using Boolean logic.
4 x DC relays, max rating 50 VDC 40W (UL, CE) |
Keypad Input |
Hawk-i will operate with an optional X-Y keypad (4x3 or 2x5). Functions available include Master user PIN change, User PIN change, Emergency door open. Logging of last 10 code entries. |
Temperature/Humidity monitoring |
Optional 2 x combined temperature/humidity sensor.
Temperature range 0°C - 60°C, accuracy +/_ 5% @ 20°C.
Humidity range 30% to 90% Relative Humidity, accuracy 5% RH @ 25°C, 60% RH ) |
Controllable Intelligent Power Strips |
Optional 2 x power strips with monitoring OR monitoring and control. Remote access to volts, amps and kWh reading.
Max power 16A or 32A rating , maximum switched load 10A.
Each socket can be sequenced up and down and be individually controlled via SNMP, Telnet and the Viewer software. |
Communication |
SNMP monitoring / management
Telnet monitoring / management
JAVA monitoring/management applet (“Viewer”)
WEB monitoring (Digital inputs/outputs, temp/humidity, power strips)
RS232 terminal configuration
Boolean logic output control |
Boolean Logic |
Digital and analogue inputs can be used to control SNMP alarms and digital outputs. |
RS232 Port |
For local configuration. Port is replicated front and back. Port also available for pass through to separate comms device. |
Security |
Telnet and WEB access password protection. |
Upgradeability |
Firmware upgradeable using serial download or TFTP download. |
Standards and Certifications |
CE, UL |
-1.jpg)
